Give kitchen and bath cabinets a new look without paying for replacement. We spray in a dust-free setup for a factory-grade finish. Family-owned with a perfect 5.0 Google rating.
With Pearland’s median home built around 2003, the typical kitchen here has builder-grade cabinets that are roughly twenty years old: stained finishes, raised or flat-panel doors, and boxes that are still sound. Painting them is a practical way to bring a kitchen in Shadow Creek Ranch, Southern Trails or Sunrise Lakes up to date without tearing anything out. About 76 percent of Pearland homes are owner-occupied, and for owners who like their layout, a new cabinet color does more for the room than almost any other single change.
Builder cabinets usually mix materials. Doors and face frames may be solid wood, while side panels, shelves and drawer boxes are MDF or particleboard with a laminate or printed finish. Each needs its own prep: degreasing and sanding on wood, a bonding primer on slick factory finishes, and a decision about whether interior shelves are worth painting at all. We remove doors and drawer fronts, spray them in a controlled setting and paint the boxes in place, taking extra care around the sink base, where humidity and everyday spills do the most damage.
We identify which parts are solid wood, MDF or laminate before quoting, since each needs different prep. Paint on slick laminate without the right primer will peel, usually first at the edges.
Builder cabinets often have a hard factory clear coat that paint cannot grab on its own. We degloss and scuff-sand it, then prime with a bonding primer so the new paint grips.
If you’re switching from knobs to pulls, we fill the old holes and drill new ones with a template before painting, so the patches vanish under the finish and the pulls line up.
Every project follows the same workflow: written estimate, careful prep, premium paint, and a walk-through together at the end.
We measure cabinets, count doors and drawers, and discuss color and finish. Written quote in 24 hours.
Doors and drawers removed and labeled. Boxes masked off in place.
Heavy sanding (220-grit then 320-grit), fill grain if needed, bonding primer for adhesion.
We spray doors and boxes, not brush, for a smooth factory-grade finish: 2 to 3 coats with light sanding between.
Doors and drawers reinstalled, hinges adjusted, walk-through with you.
Our Pearland hub page lists all services, neighborhoods, and FAQs that apply to Pearland.
View the Pearland painter page →Usually, if the boxes are solid and the doors are in good shape. Builder cabinets from the 2000s generally take paint well once properly prepared. Peeling laminate or water-swollen particleboard is a different story, and we’ll tell you if a piece should be replaced.
Yes. A darker island, or darker lowers with lighter uppers, is a common request in newer kitchens. We help you choose colors that work with your countertops and floors and show them on a sample door first.
Clean them with a soft cloth and mild soap, not abrasive cleaners. Keep wet towels off door edges and wipe up spills near the sink and dishwasher quickly. Gulf Coast humidity means the finish takes a while to fully harden, so handle the doors gently at first.
Free in-home estimate. Written scope of work. No high-pressure sales, just honest pricing and good paintwork.